Categories: Shield for Arduino
Adafruit Assembled Data Logging shield for Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Categories: Shield for Arduino
Waveshare Motor Control Shield
Whatsapp InquiryRated 0 out of 5
0 Reviews- Power Supply:5 V
- Output Current:800mA
- Dimension:60x56x20 mm
- Power Supply:5 V
- Output Current:800mA
- Dimension:60x56x20 mm
Wireless Transmitter 915Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
Whatsapp InquiryRated 0 out of 5
0 Reviews- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Categories: Shield for Arduino
XBee Adapter Shield Breakout Board for XBee Module
Whatsapp InquiryRated 0 out of 5
0 Reviews- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket